By the end of this section, you will be able to:

- Understand the rules of vector addition, subtraction, and multiplication.
- Apply graphical methods of vector addition and subtraction to determine the displacement of moving objects.

The information presented in this section supports the following AP® learning objectives and science practices:

**3.A.1.1**The student is able to express the motion of an object using narrative, mathematical, and graphical representations.**(S.P. 1.5, 2.1, 2.2)****3.A.1.3**The student is able to analyze experimental data describing the motion of an object and is able to express the results of the analysis using narrative, mathematical, and graphical representations.**(S.P. 5.1)**

**Figure ****3.8** Displacement can be determined graphically using a scale map, such as this one of the Hawaiian Islands. A journey from Hawai’i to Moloka’i has a number of legs, or journey segments. These segments can be added graphically with a ruler to determine the total two-dimensional displacement of the journey. (credit: US Geological Survey)

A **vector** is a quantity that has magnitude and direction. Displacement, velocity, acceleration, and force, for example, are all vectors. In one-dimensional, or straight-line, motion, the direction of a vector can be given simply by a plus or minus sign. In two dimensions (2-d), however, we specify the direction of a vector relative to some reference frame (i.e., coordinate system), using an arrow having length proportional to the vector’s magnitude and pointing in the direction of the vector.

Figure 3.9 shows such a *graphical representation of a vector*, using as an example the total displacement for the person walking in a city considered in Kinematics in Two Dimensions: An Introduction. We shall use the notation that a boldface symbol, such as Dsize 12{D} {}, stands for a vector. Its magnitude is represented by the symbol in italics, Dsize 12{D} {}, and its direction by θsize 12{θ} {}.

In this text, we will represent a vector with a boldface variable. For example, we will represent the quantity force with the vector Fsize 12{F} {}, which has both magnitude and direction. The magnitude of the vector will be represented by a variable in italics, such as Fsize 12{F} {}, and the direction of the variable will be given by an angle θsize 12{θ} {}.

**Figure ****3.9** A person walks 9 blocks east and 5 blocks north. The displacement is 10.3 blocks at an angle 29.1°size 12{“29” “.” “1°”} {} north of east.

**Figure 3.10** To describe the resultant vector for the person walking in a city considered in Figure 3.9 graphically, draw an arrow to represent the total displacement vector D . Using a protractor, draw a line at an angle θ relative to the east-west axis. The length D of the arrow is proportional to the vector’s magnitude and is measured along the line with a ruler. In this example, the magnitude D of the vector is 10.3 units, and the direction θ is 29.1° north of east.

The **head-to-tail method** is a graphical way to add vectors, described in Figure 3.11 below and in the steps following. The **tail** of the vector is the starting point of the vector, and the **head** (or tip) of a vector is the final, pointed end of the arrow.

**Figure 3.11Head-to-Tail Method:** The head-to-tail method of graphically adding vectors is illustrated for the two displacements of the person walking in a city considered in Figure 3.9. (a) Draw a vector representing the displacement to the east. (b) Draw a vector representing the displacement to the north. The tail of this vector should originate from the head of the first, east-pointing vector. (c) Draw a line from the tail of the east-pointing vector to the head of the north-pointing vector to form the sum or **resultant vector** D . The length of the arrow D is proportional to the vector’s magnitude and is measured to be 10.3 units . Its direction, described as the angle with respect to the east (or horizontal axis) θ is measured with a protractor to be 29.1°.

*Step 1.**Draw an arrow to represent the first vector (9 blocks to the east) using a ruler and protractor*.

**Figure ****3.12**

** Step 2.** Now draw an arrow to represent the second vector (5 blocks to the north).

**Figure ****3.13**

*Step 3.**If there are more than two vectors, continue this process for each vector to be added. Note that in our example, we have only two vectors, so we have finished placing arrows tip to tail*.

*Step 4.**Draw an arrow from the tail of the first vector to the head of the last vector*. This is the **resultant**, or the sum, of the other vectors.

**Figure ****3.14**

** Step 5.** To get the

** Step 6. **To get the

The graphical addition of vectors is limited in accuracy only by the precision with which the drawings can be made and the precision of the measuring tools. It is valid for any number of vectors.

Use the graphical technique for adding vectors to find the total displacement of a person who walks the following three paths (displacements) on a flat field. First, she walks 25.0 m in a direction 49.0° north of east. Then, she walks 23.0 m heading 15.0° north of east. Finally, she turns and walks 32.0 m in a direction 68.0° south of east.

Represent each displacement vector graphically with an arrow, labeling the first A , the second B , and the third C , making the lengths proportional to the distance and the directions as specified relative to an east-west line. The head-to-tail method outlined above will give a way to determine the magnitude and direction of the resultant displacement, denoted R .

(1) Draw the three displacement vectors.

**Figure ****3.15**

(2) Place the vectors head to tail retaining both their initial magnitude and direction.

**Figure ****3.16**

(3) Draw the resultant vector, R.

**Figure ****3.17**

(4) Use a ruler to measure the magnitude of R, and a protractor to measure the direction of R. While the direction of the vector can be specified in many ways, the easiest way is to measure the angle between the vector and the nearest horizontal or vertical axis. Since the resultant vector is south of the eastward pointing axis, we flip the protractor upside down and measure the angle between the eastward axis and the vector.

**Figure ****3.18**

In this case, the total displacement R is seen to have a magnitude of 50.0 m and to lie in a direction 7.0° south of east. By using its magnitude and direction, this vector can be expressed as R=50.0 m and θ=7.0°south of east.

The head-to-tail graphical method of vector addition works for any number of vectors. It is also important to note that the resultant is independent of the order in which the vectors are added. Therefore, we could add the vectors in any order as illustrated in Figure 3.19 and we will still get the same solution.

**Figure ****3.19**

Here, we see that when the same vectors are added in a different order, the result is the same. This characteristic is true in every case and is an important characteristic of vectors. Vector addition is **commutative**. Vectors can be added in any order.

(This is true for the addition of ordinary numbers as well—you get the same result whether you add 2+3 or 3+2, for example).

Vector subtraction is a straightforward extension of vector addition. To define subtraction (say we want to subtract B from A , written A–B , we must first define what we mean by subtraction. The negative of a vector B is defined to be –B ; that is, graphically the negative of any vector has the same magnitude but the opposite direction, as shown in Figure 3.20. In other words, B has the same length as –B , but points in the opposite direction. Essentially, we just flip the vector so it points in the opposite direction.

**Figure 3.20** The negative of a vector is just another vector of the same magnitude but pointing in the opposite direction. So B is the negative of –B ; it has the same length but opposite direction.

The *subtraction* of vector B from vector A is then simply defined to be the addition of –B to A. Note that vector subtraction is the addition of a negative vector. The order of subtraction does not affect the results.A – B = A + (–B).

This is analogous to the subtraction of scalars (where, for example, 5 – 2 = 5 + (–2) ). Again, the result is independent of the order in which the subtraction is made. When vectors are subtracted graphically, the techniques outlined above are used, as the following example illustrates.

A woman sailing a boat at night is following directions to a dock. The instructions read to first sail 27.5 m in a direction 66.0° north of east from her current location, and then travel 30.0 m in a direction 112° north of east (or 22.0° west of north). If the woman makes a mistake and travels in the *opposite* direction for the second leg of the trip, where will she end up? Compare this location with the location of the dock.

**Figure ****3.21**

We can represent the first leg of the trip with a vector A, and the second leg of the trip with a vector B . The dock is located at a location A+B. If the woman mistakenly travels in the *opposite* direction for the second leg of the journey, she will travel a distance B (30.0 m) in the direction 180°–112°=68° south of east. We represent this as –B, as shown below. The vector –B has the same magnitude as B but is in the opposite direction. Thus, she will end up at a location A+(–B), or A–B.

**Figure ****3.22**

We will perform vector addition to compare the location of the dock, A + B , with the location at which the woman mistakenly arrives, A + (–B) .

(1) To determine the location at which the woman arrives by accident, draw vectors Asize 12{A} {} and –B.

(2) Place the vectors head to tail.

(3) Draw the resultant vector R .

(4) Use a ruler and protractor to measure the magnitude and direction of R.

**Figure ****3.23**

In this case, R=23.0 m and θ=7.5° south of east.

(5) To determine the location of the dock, we repeat this method to add vectors Asize 12{A} {} and Bsize 12{B} {}. We obtain the resultant vector R’ :

**Figure ****3.24**

In this case R = 52.9 m and θ=90.1° north of east.

We can see that the woman will end up a significant distance from the dock if she travels in the opposite direction for the second leg of the trip.

Because subtraction of a vector is the same as addition of a vector with the opposite direction, the graphical method of subtracting vectors works the same as for addition.

If we decided to walk three times as far on the first leg of the trip considered in the preceding example, then we would walk 3 × 27.5 m, or 82.5 m, in a direction 66.0° north of east. This is an example of multiplying a vector by a positive scalar. Notice that the magnitude changes, but the direction stays the same.

If the scalar is negative, then multiplying a vector by it changes the vector’s magnitude and gives the new vector the opposite direction. For example, if you multiply by –2, the magnitude doubles but the direction changes. We can summarize these rules in the following way: When vector A is multiplied by a scalar c,

the magnitude of the vector becomes the absolute value of cA,

if c is positive, the direction of the vector does not change,

if c is negative, the direction is reversed.

In our case, c=3 and A=27.5 m. Vectors are multiplied by scalars in many situations. Note that division is the inverse of multiplication. For example, dividing by 2 is the same as multiplying by the value (1/2). The rules for multiplication of vectors by scalars are the same for division; simply treat the divisor as a scalar between 0 and 1.

In the examples above, we have been adding vectors to determine the resultant vector. In many cases, however, we will need to do the opposite. We will need to take a single vector and find what other vectors added together produce it. In most cases, this involves determining the perpendicular **components **of a single vector, for example the *x*–* and* *y*-components, or the north-south and east-west components.

For example, we may know that the total displacement of a person walking in a city is 10.3 blocks in a direction 29.0° north of east and want to find out how many blocks east and north had to be walked. This method is called *finding the components (or parts)* of the displacement in the east and north directions, and it is the inverse of the process followed to find the total displacement. It is one example of finding the components of a vector. There are many applications in physics where this is a useful thing to do. We will see this soon in Projectile Motion, and much more when we cover **forces** in Dynamics: Newton’s Laws of Motion. Most of these involve finding components along perpendicular axes (such as north and east), so that right triangles are involved. The analytical techniques presented in Vector Addition and Subtraction: Analytical Methods are ideal for finding vector components.MAZE GAME

Learn about position, velocity, and acceleration in the “Arena of Pain”. Use the green arrow to move the ball. Add more walls to the arena to make the game more difficult. Try to make a goal as fast as you can.

Click to view contenthttps://openstax.org/l/28mazegame

**Figure 3.25**

Login

Accessing this course requires a login. Please enter your credentials below!